AMERICAN FARM PULLERS ASSOCIATION

8000 lb. Open Diesel -- 4x4
Revised - January 2010

ALERT:  Tractor & Truck pullers hitch opening size requirements:
3 ¾ inch front to back and 3 inch side to side.

 

1. HANGING WEIGHT ALLOWED NOTHING TO EXCEED 60" FROM CENTER OF FRONT AXLE .

2. DRAWBARS ALLOWED.

3. 26 INCH HITCH HEIGHT. HITCH OPENING SIZE REQUIREMENTS 3 ¾ INCH FRONT TO BACK AND 3 INCH SIDE TO SIDE.

4. DOT TIRES ONLY.

5. EXHAUST MUST EXIT STRAIGHT UP OR STRAIGHT DOWN. MUST HAVE 2 GRADE 5 3/8 BOLTS 1/2 INCH APART 90 DEGREES FROM EACH OTHER AND RECOMMENDED TO BE 12 INCHES FROM EXHAUST IMPELLER.

6. ENGINE, RUNNING GEAR, AND CHASSIS MUST BE FACTORY ONE TON OR BELOW OR REPLACEMENT. ENGINE SWAPS BETWEEN MANFACTURERS PERMITTED.

7. DRIVE SHAFT LOOPS, U-JOINT SHIELDS, BLOW PROOF BELLHOUSING AND/OR SFI SCATTER BLANKET REQUIRED.

8. AIR SHUT OFF REQUIRED. (REVISED. January 2010)

9. FIRE EXTINGUISHER REQUIRED!!!!!!

10. ALL PROTESTS MUST BE MADE TO TECH COMMITTEE BEFORE CLASS IS OVER, BY A PARTICIPATE OF THIS CLASS.

11. MODIFIED STREET TRUCKS, WITH ALL SAFETY EQUIPMENT, MAY PULL IN THIS CLASS. (REVISED. January 2010)

12. TRACK AND TECH OFFICALS DECISIONS ARE FINAL!!!!!!!!